CT-SAMM
The CT-SAMM is a professional quality fully agile micro modulator providing an audio and video modulated RF carrier from 54 to 864 MHz on any CATV channel from 2 to 135, and UHF channel from 14 to 78. Any standard video source can be used, including satellite receivers, demodulators, VCRs, laser/DVD players, and TV/security cameras. The CT-SAMM employs highly stable synthesized frequency control. Setup and tuning are easy and straightforward taking advantage of the unit’s front panel access to all level controls and indicators. Channel frequency information with FCC offsets is programmed into each unit at the factory. Nonvolatile memory maintains channel selection in event of power loss.
CT-SAW860-*
Commercial fixed channel, SAW filtered modulator, 19 inch rack mountable, specify channel when ordering, available in channels 37-62, 95-99.
CT-SAW860-*
Commercial fixed channel, SAW filtered modulator, 19 inch rack mountable, specify channel when ordering, available in channels 2-36.
CT-SAW860-*
Commercial fixed channel, SAW filtered modulator, 19 inch rack mountable, specify channel when ordering, available in channels 63-94, 100-125.
CT-SFMM-**
Fixed Channel Micro Modulator
The CT-SFMM is a professional quality, channelized, heterodyne audio/video SAW filtered micro modulator. The unit provides a mono audio and video modulated RF carrier output on any single CATV channel from 2-13 & 14-59 (A-WW). The CT-SFMM is ideal for placing audio and video onto any unused CATV channel. Different standard audio/video sources, such as satellite receivers, television cameras, videotape recorders, or television demodulators can be used.
The CT-SFMM takes baseband audio and video and modulates these signals onto the desired output channel. The heterodyne conversion process used in the CT-SFMM employs a crystal referenced, PLL synthesized local oscillator that guarantees a rock-solid, no drift output for the life of the modulator. The CT-SFMM also meets FCC Docket 21006 aeronautical frequency offset requirements. The modulator accepts standard composite video in the range of 0.7 to 2.5 V p-p.
- Fixed channel SAW filtered micro modulator
- Available from channels 2-13 & 14-59 (A-WW) CATV
- Die-cast chassis offers superior protection against ingress or egress
- Recessed front panel access to all level controls and indicators
- Use with Cabletronix CTPS-12 power supply and CTRC-12 rack chassis or with 3rd party power supplies and/or chassis depending upon configuration
- 1-year warranty
- 3 year extended warranty available
The CT-SFMM is a professional quality, channelized, heterodyne audio/video SAW filtered micro modulator. The unit provides a mono audio and video modulated RF carrier output on any single CATV channel from 2-13 & 14-59 (A-WW). The CT-SFMM is ideal for placing audio and video onto any unused CATV channel. Different standard audio/video sources, such as satellite receivers, television cameras, videotape recorders, or television demodulators can be used.
The CT-SFMM takes baseband audio and video and modulates these signals onto the desired output channel. The heterodyne conversion process used in the CT-SFMM employs a crystal referenced, PLL synthesized local oscillator that guarantees a rock-solid, no drift output for the life of the modulator. The CT-SFMM also meets FCC Docket 21006 aeronautical frequency offset requirements. The modulator accepts standard composite video in the range of 0.7 to 2.5 V p-p.
- Fixed channel SAW filtered micro modulator
- Available from channels 2-13 & 14-59 (A-WW) CATV
- Die-cast chassis offers superior protection against ingress or egress
- Recessed front panel access to all level controls and indicators
- Use with Cabletronix CTPS-12 power supply and CTRC-12 rack chassis or with 3rd party power supplies and/or chassis depending upon configuration
- 1-year warranty
- 3 year extended warranty available