Loading

CT-EDID-1
The CableTronix CT-EDID-1 manages and controls the Extended Display Identification Data (EDID) information between HD Sources and HD displays to lock in a resolution and eliminate many synchronizing issues. The unit allows for the manual selection of HD resolution in instances where the automatic EDID function can not handshake with the source and the sink device such as a display, splitter, converter, extender or other HDMI device. With Sixteen available EDID correction modes and the ability to support 4K and Consumer Electronics Control (CEC) installers only need to keep one model in stock for even the most uncommon installations. The CT-EDID-1 is bi-directional and supports HDMI cable lengths of up to fifteen feet at the input and output.

 
CT-HD-90S
90 Degree HD Swivel adapter

 
CT-HD-F/F
HD Female to HD Female splice adapter

 
CT-HD-RPTR
The CableTronix CT-HD-RPTR allows for HDMI cable runs at a total distance of up to 100 feet. This is achieved with a maximum run of 75 feet from the source device to the CT-HD-RPTR and an additional 25 feet from the CT-HD-RPTR to the viewing location. The extended distance is achieved without degradation by regenerating the incoming HDMI signal through a process of decoding and re-encoding the signal to provide new standard HDMI signal. The unit is powered by voltage over the cabling from the HDMI source.

 
CT-HDBASET-330
The CableTronix CT-HDBASET-330 is a five play signal extender which utilizes a single Cat5E/6 cable. The unit is capable of transporting HDMI signals, Ethernet, IR remote control signals, RS-232 Control, and PoE power all over one CAT5E/6 cable. This easy to install system allows for transmission distances over twisted pair up to 330 feet. The CT-HDBASET-330 uses HDBaseT technology to bridge the gap between HDMI transport over long distances and the limitations of HDMI cables.  Featuring field upgradeable firmware, the CT-HDBASET-330  has a level of future proofing to protect the initial investment from short term obsolescence in the fast moving digital video market.  This fully compliant HDCP unit features HDMI V1.4 with 3D at up to 1080P.  The CT-HDBASET-330 incorporates advanced features such as automatic equalization, automatic gain control, and internal electrostatic discharge protection. Easy to read LED indicators confirm link status.

 
CT-HDBASET-330-B
The CableTronix CT-HDBASET-330-B is a signal extender which utilizes a single Cat5E/6 cable. The unit is capable of transporting HDMI signals and IR remote control signals over one CAT5E/6 cable. This easy to install system allows for transmission distances over twisted pair up to 330 feet. The CT-HDBASET-330-B uses HDBaseT technology to bridge the gap between HDMI transport over long distances and the limitations of HDMI cables.  This fully compliant HDCP unit also has easy to read LED indicators confirm link status. The ability to use an existing ethernet cable to add in HDMI and IR control can be a significant time saver in the field. This plug and play system is perfect for long distance projector applications and offers dealers, installers, and system integrators considerable value and efficiency while satisfying customer requirements.

 
CT-HDVC-10
10' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-10S
10' Swivel head next generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-15
15' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-15S
15' Swivel head next generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-3
3' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-30
30' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-3S
3' Swivel head next generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-50
50' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-6
6' Next Generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVC-6S
6' Swivel head next generation HD Cable featuring Audio Return Channel and Ethernet Channel

 
CT-HDVD-1X8SPL
1 x 8 HD Splitter/amplifier, powered

 
CT-HDVD-2X2SPL
Allows two HD devices to be switched easily into two HDTV monitors or projectors. Simply connect your HDTV displays to the splitter’s display outputs and enjoy the ability to switch either of the two HD inputs to either or both of the two HD outputs. The CT-HDVD-2X2SPL splitter can also be placed at the end of a long HD cable to regenerate the HD signal.

 
CT-HDVD-4X14K-SW
The Cabletronix CT-HDVD-4X14K-SW is the perfect solution for managing multiple sources of audio and video. It provides three inputs for direct connection of HDMI devices. This switch has an additional VGA and Audio input also. Analog Audio inputs can be embedded in HDMI signal, and a pair of RCA outputs make the extraction of audio for direct connection to amplifiers. Simply press one button to select your desired HDMI source for display on the HDTV. It can be widely used in digital entertainment centers, control centers, conference rooms, schools and corporate training environments.

 
CT-HDVD-4X2MATRIX
4x2 HD Matrix switch, switches any four HD inputs to either/both of two HD outputs, includes remote control

 
CT-HDVD-5X1
5 Input, 1 output HD video switcher with front panel control and infrared remote control.

 
CT-HDVD-8X84K-MTX
The Cabletronix CT-HDVD-8X84K-MTX is an 8 input by 8 output HDMI matrix switch. It allows any of the eight Input Channels (HDMI) to be routed to any of the eight Output Channels (HDMI), no matter whether the source is HDCP or not. Users can choose several different ways to control the matrix: by using the supplied infrared remote control, RS232, RS485, or LAN connections. The CT-HDVD-8X84K-MTX internal EDID library features default EDID configurations, in addition to native EDID data for any output/display. This unit offers solutions for digital entertainment centers, HDTV retail displays, trade show displays, HDTV, STB, DVD and projector factories, data center control, information distribution, conference room presentation, school and corporate training environments.

 
CT-HDVD-EXT-IR120
The CT-HDVD-EXT-IR120 kit has the ability to transmit and receive a 1080p HD source up to 120 feet along with Infrared control over a single Cat5e / Cat6 4 Pair UTP Cable. With a single low cost CAT-5e/6 cable, users can readily extend HDTV sources from DVD players, PS3, PC, and many other sources compliant with TMDS to distant display monitors including HD enabled TV sets or LCD PC monitors. This cost effective flexibility allows HDCP compliant DVD players or PS3 to transmit high quality video and audio with a greater distance at a minimal cost. The transmitting unit is used to capture the input HD signal and carries the signal over a single RJ-45 connector through the Cat-5e / 6 cable. The receiving unit is responsible for receiving and equalizing the transmitted TMDS multimedia data.

 
CT-HDVD-EXT-IR180
The CT-HDVD-EXT-IR180 kit has the ability to transmit and receive a 1080p HD source up to 180 feet along with Infrared control over a single Cat5e / Cat6 4 Pair UTP Cable. With a single low cost CAT-5e/6 cable, users can readily extend HDTV sources from DVD players, PS3, PC, and many other sources compliant with TMDS HDMI to distant display monitors including HD enabled TV sets or LCD PC monitors. This cost effective flexibility allows HDCP compliant DVD players or PS3 to transmit high quality video and audio with a greater distance at a minimal cost. The transmitting unit is used to capture the input HD signal and carry the signal over a single RJ-45 connector through the Cat-5e / 6 cable. The receiving unit is responsible for receiving and equalizing the transmitted TMDS HDMI multimedia data.

 
CT-HDVD-EXT-RG-IR195
The CT-HDVD-EXT-RG-IR195 kit has the ability to transmit and receive a 1080p HD source up to 195 feet along with Infrared control over a single coaxial cable. With a single low cost coaxial cable, users can readily extend HDTV sources from DVD players, PS3, PC, and many other sources compliant with TMDS to distant display monitors including HD enabled TV sets or LCD PC monitors. This cost effective flexibility allows HDCP compliant DVD players or PS3 to transmit high quality video and audio with a greater distance at a minimal cost. The transmitting unit is used to capture the input HD signal and carries the signal over a single coaxial connector through the coaxial cable. The receiving unit is responsible for receiving and equalizing the transmitted TMDS multimedia data.

 
CT-HDVD-FIBEXT
The Cabletronix CT-HDVD-FIBEXT HDMI over fiber extender provides a complete solution for HDMI extension over single core, SC type single-mode fiber optic cable. It supports 3DTV and all HDMI 1.3 features, including full HD 1080p, deep color, Lip sync and CEC. The CT-HDMI-FIBEXT also supports all high resolution multichannel audio formats, including Dolby Digital Plus, LCPM7.1, DTS-HD Mater Audio and Dolby TrueHD. The unit is capable of transmitting HDMI signals up to 20,000 Meters (20 Kilometers). The added capability of reverse IR control transmission from the receive site back to the source allows the user to control the HDMI source (satellite receiver, DVD player etc.) from the remote viewing location. The units are housed in attractive, low profile housings and ship with the power supplies, IR emitter cable and IR target cables.

 
CT-HDVD-HDCX
The CT-HDVD-HDCX has been designed to convert HDMI signals for transmission over 75 Ohm RF coaxial cable such as RG-6, RG-59 or RG-11. The transmitter uses a 64QAM mode to achieve long distance transmission with minimal signaldegradation. A source can easily be set up for a single one to one link, one to many link or many to many link using standard 1 GHz RF splitters. Using a single low cost coaxial cable, users can readily extend HDTV sources from DVD players, PS3, computers and many other sources to distant display monitors including HD enabled TV sets or LCD PC monitors. With the advantage of excellent image quality and strong resistance to interference this model is idea for CCTV, digital signage, media education or any other application that requires an HDMI source to be located a long distance from the viewing panel or panels.

 
CT-HDVD-HDSTR-KIT
The CT-HDVD-HDSTR-KIT is an HD Video Streaming set which includes an HDMI transmitter and HDMI receiver for real-time extending and distributing 1080p video up to 650 feet (200m) using Cat6 or better and up to 575 feet (175m) using Cat5e. The units can be used in a point to point application to distribute a single HDMI source to a single video receive site or in a point to multi-point application to distribute a single HDMI source to multiple receive sites using an external ethernet switch. Both the transmitter and receiver can be powered via a local DC power supply or over the ethernet link using a Power over Ethernet (PoE) switch.

 
CT-HDVD-HDSTR-RX
Additional receive units for use with the CT-HDVD-HDSTR-KIT, Use CTPS-5V power supply (sold separately) if not powering receive units with PoE.

 
CT-HDVD-HDWR-KIT
The CT-HDVD-HDWR-KIT is a long range wireless HDbitT HDMI AV transmitter that can extend high definition audio and video to any HDTV display up to 400’ away with line of sight or 150’ through normal buildings. It supports HD resolutions up to 1080p and provides remote transmission of infrared control from the monitoring device to the source device. The CT-HDVD-HDWR-KIT is the perfect solution for distributing high definition video and audio in locations where wires can not be run. Up to three total receive units can be used with a single transmission unit.

 
CT-HDVD-HDWR-RX
Additional HDMI Wireless receive unit for use with the CableTronix CT-HDVD-HDWR-KIT HDMI Wireless transmit and receive kit.

 
CT-HDVD-MINI1X2SPL
The CT-HDVD-MINI1X2SPL is a small, practical HDMI splitter used to distribute a single HDMI signal to two identical HDMI outputs simultaneously. This unit supports full 3D format and 4K x 2K. Its video amplifier bandwidth can process up to 3.4 Gbps / 340 Mhz. The CT-HDVD-MINI1X2SPL can be connected in series (cascaded) to achieve long distance transmission of HD signals of more than 15 meters. When two or more CT-HDVD-MINI1X2SPL are cascaded, they can be used to create a larger distribution.

 
CT-HDVD-MINI1X4SPL
The CT-HDVD-MINI1X4SPL is a small, practical HDMI splitter used to distribute a single HDMI signal to four identical HDMI outputs simultaneously. This unit supports full 3D format and 4K x 2K. Its video amplifier bandwidth can process up to 3.4 Gbps / 340 Mhz. The CT-HDVD-MINI1X4SPL can be connected in series (cascaded) to achieve long distance transmission of HD signals of more than 15 meters. When two or more CT-HDVD-MINI1X4SPL are cascaded, they can be used to create a larger distribution. The CT-HDVD-MINI1X4SPL is perfect for HDTV retail displays, trade shows, projector displays, conference room presentations, schools, corporate training centers and high end residential applications.

 
CT-RGB/HD-CONV
RGB to HD converter, converts RGB and digital audio to HD

 
CTPS-5V
Optional power supply for CT-HDVD-HDSTR-RX receive unit for use when receive unit is not being powered via PoE from in line PoE switch, 5VDC, 1A.